Alzmetall is offered by Onrion LLC for years at reasonable prices and delivery time to United States . Check our web page for products from the brand Alzmetall regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout United States .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
drilling machine
Speed detection During the assembly it should be mounted in the ground speed measuring 2 mm.
DC motor
TAKE READER AR: 01781160
ALZMETAL-SAULENBOHRMASCHINE AX 4 / SV Lacquer: DD-structured paint RAL 7035/7016/9006 gray Order: works standard WN 80003 Feed: s = 0:10 + 0:30 mm / rev Spindle: Short spindle MK 4 Spindle speeds: 70 to 1200 min-1 Operating voltage: 400 Volt / 50 Hz IP 54 Drive motor: 750/1500 min -1. 1.8 / 2.9 KW
SYNCHRONSCHEIBE Z=24 1801-22-009
(PROTECTION PLIABLE)
Adjusting disc (DISC RULE SET TO DRIVE MOTOR) 1802-21-037
Transmission column drill
Drilling Machine Machine Technical Description: Drilling Performance in Steel St60 mm 24 inches 1 Drilling Performance in cast-iron EN-GJL-200 mm 30 inches 1.18 Drilling Capacity in steel St60 mm 40 inches 1.57 Tapping Performance in steel St60 M24 inch 1 Tapping Performance in Cast-iron EN-GJL-200 M30 inch 11/ 4 Tool Taper / Short Spindle MK3 MT3 Z-Travel of Spindle mm 120 inches 4.72 Distance Spindle to Column mm 293 inches 11.53 Column Diameter mm 115 inches 4.52 Table Clamping Area mm 515x 360 inches 20.27 x 14.17 Distance Spindle/table min./max. mm 117 /701 inches 4.60 / 27.59 T-Slots (number x width x distance) mm 2 x 14 x 224 inches 2 x 0.55 x 8.81 Feed (manual and automatic) mm/Rev. 0.1 + 0.2 inch/Rev. 0.00393 + 0.00787 Net weight approx. kg 270 lbs 594 Drive System: AC Motor: n=1800 1.1 kW 1.34HP Spindle Speed Range Rpm 160 - 1125 (Variator)
XC ruler MM 770
a drill
BALL SCREW IMAGE: 1449506501 Nuts REF: 0446831 2521-55-016
Ball screw+nut
radial drill
Half-height drilling machine
Belt for Model:AB40/HST P/N:178178
V-belts