logo

Sale of Pollard pumps products in United States

Pollard pumps is offered by Onrion LLC for years at reasonable prices and delivery time to United States . Check our web page for products from the brand Pollard pumps regardless if they are not stated on our website, do not hesitate to contact us for all future product enquiries. Our products are delivered to your door with our wide distribution network throughout United States .
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.

Brand products Pollard pumps

MMPII100W14038050

POLLARD PUMP MMP II 100W TYPE 2 Flow: 140 L/h Pressure: 5 Bars Voltage: 220/380V 50Hz

MP06P

Flow: 500L/h By-pass set at 5 bars Motor 0.37Kw IP 55 Class F 1420Tr/min 220/380V 50Hz 3 phases Self priming volumetric Pump Body/stator cast iron Shaft/blades treated steel Shaft seal: FKM (viton) mechanical seal

MP10 ATEX

Positive displacement motor pump POLLARD Ex II 1G Ex c IIc T6 Installation in surface industries (II), pump inside in zone 0 (1),in gaz atmosphere(G), (gaz group IIC, temperature class T6 Ambient temperature : -20 à +40°C Fluid temperature : -20 à +60°C Flow: 800 L/h at 50Hz Built-in Bypass protecting the pump: set at 5 Bars Viton mechanical seal Pump body and stator made of cast iron Shaft and vanes made of treated steel Industrial motor 0,75kW normalized B34 flange FT100 IP 55 Class F 1500 rpm (4 poles) 3 phases: 230/400 V at 50Hz 265/460 V at 60 Hz Aluminum frame

P1050CGBMP ATEX

Positive displacement pump POLLARD type P10 50 CGB ATEX Ex II 1G Ex c IIc T6 Installation in surface industries (II), pump inside in zone 0 (1),in gaz atmosphere(G), (gaz group IIC, temperature class T6 Ambient temperature : -20 à +40°C Fluid temperature : -20 à +60°C Capacity of 10cm³ Built-in Bypass protecting the pump: set at 5 Bars Viton mechanical seal Pump body and stator made of cast iron Shaft and vanes made of treated steel Clavette keyed shaft « C » Clavette keyed shaft « G » Viton mechanical seal « B » Bypass set at 5 bar (standard setting) « MP » Flange with holes for mounting on Motorpump MP10 P ATEX.

SNH210 ER40E6.7-W2

CIRCULATION PUMP,NR:G25622/1 P:37bar

MMPIII100W200LTRI

Special Motorpump POLLARD

MPX06P

Motor pump